Week 5 (16/8/2020 - 22/8/2020)

by NUR AISYA AFFRINA BINTI MOHAMED ARIFFIN

17/8/2020 (Monday)

Working time: 8:30am – 6:00pm

  • I started my day by updating the daily yield as per request by Mr KL tang before 10:00am.
  • After that, Mr KL Tang asked me to help Kak Ida and Kak Nurul to work out on an issue.
    • Currently, SMT Reject has no reject breakdown. Therefore, Mr KL Tang assigned us to think of a way to verify the breakdowns.
    • First, we discuss on the significant processes that are involved in SMT Department.
    • Then, we narrow down the processes to those that are possible to produce rejects.
  • After lunch break, the three of us went to each machine of different processes to inspect several lots.
    • The data from these lots are taken for further analysis.
    • For example, we collected the data for each lot quantity before and after the processes and compare the quantities with the one that were stated in the Lot Traveller.
    • Lot Traveller is a transcript that travel around with each lot to track in the quantity if each lot by the operator that handles the lot.

 

18/8/2020 (Tuesday)

Working time: 8:30am – 6:00pm

  • I started my day by updating the daily yield as per request by Mr KL tang before 10:00am.
  • After that, Mr CC Ch’ng came to Level 3 Office and meet with Kak Ida and I.
    • He wanted us to help him on measuring a new Inari product from NGK Electronics.
    • He attached along its technical drawing for us to verify the measurements and compare the difference between the actual dimension and the dimensions in the drawing.
    • Kak Ida and I went to the OGP Machine and measure the product before lunch break.
  • After lunch break, I rearranged the data gathered accordingly and created a PowerPoint Slide for a better and proper presentation.
  • Later, KL Tang asked me to follow up with the TV problem.
    • I contacted Nazrin, and IT Engineer from P21 to help me out on this display problem.
    • Nazrin and I try out a few alternative such as downloading an outsource to be connected to the TV later.
    • We used pendrive to transfer the source to the TV. However, this alternative still meet failure.
    • I updated Mr KL Tang about the updated TV problem.

 

19/8/2020 (Wednesday)

Working time: 8:30am – 6:00pm

  • I started my day by updating the daily yield as per request by Mr KL tang before 10:00am.
  • After that, I worked with two IT Engineers to use HDMI and VGA to be connected to the TV and use screen extension.
    • We went to each problematic TV and try out this alternative.
    • However, the nearby PCs were fully occupied and cannot be connected to another VGA/HDMI cable.
    • After discussing, the three of us agreed to buy 3 dongles to be connected to the 3 TVs.
    • The IT Engineer asked me to convince Mr KL Tang that this is the only way left and the possibility of success for this alternative is 100%.
  • After lunch break, I had a quick meet up with Mr KL Tang.
    • I issued out the alternative on purchasing new dongles for the TV.
    • Mr KL Tang voiced out this idea to the Management team and unfortunately, purchasing new dongles is expensive.
    • Mr KL Tang asked me to KIV this problem and help Kak Ida on SMT Breakdown.

 

20/8/2020 (Thursday)

Working time: 8:30am – 6:00pm

  • I started my day by updating the daily yield as per request by Mr KL tang before 10:00am.
  • Today, Mr Sabran came and urged us to finish up with the TV problem.
    • I came out with an idea of switching the TV positions and priorities locating well-displayed TV at the hot spot.
    • Mr KL Tang agreed to my idea and asked me to contact P21 Facility team to help me unmount the TV.
  • After lunch break, Faiz and two of his friends from P21 Facility team came.
    • They unmounted the TV and switched their position.
    • As a result, one TV is decided to be shipped out to P34.
  • Therefore, currently there are 5 TVs in total.
    • FAVI has Samsung TV which is not a problem.
    • MCOB A has the Philip TV but is now connected to the dongle and working well.
    • 1 out of 3 TVs in SMT is Samsung TV and working well.
    • Therefore, I had to figure out on way to display both TV before this week ended.
  • Later, I asked Mr KL Tang to request for a laptop to utilize the screen extension method.
    • Mr KL Tang agreed on the idea.
    • To add, he ordered a VGA splitter to connect those 2 TVs to a single laptop only.
    • Mr KL Tang said that the laptop will be arriving at P13 tomorrow. Therefore, I have to continue on this issue tomorrow.
    • As for the TV that requires the VGA splitter, it was left unpowered until the splitter arrive at P13.

 

21/8/2020 (Friday)

Working time: 8:30am – 6:00pm

  • I started my day by updating the daily yield as per request by Mr KL tang before 10:00am.
  • Then, KL Tang assigned me on some tasks.
    • He asked me to check on each TV tagging number.
    • He also asked me to check on the new PCs that were transferred into MCOB B Department. He asked me to make sure that the PCs were connected.
  • After that, Mr CC Ch’ng asked me to do some additional measurement on the NGK Product.
    • I used the OGP Machine to measure and gather all the data.
    • I presented my data in a PowerPoint Slide to help Mr CC Ch’ng understand better.
  • After lunch break, the laptop from P21 arrived.
    • I went to SMT Department to start connecting the laptop to the TV.
    • I utilized the table nearby to place the laptop.
    • The laptop was connected to the TV using VGA cable.
    • Then, the screen from the laptop was extended to the TV and the content was displayed successfully as in website.
  • Later, I updated Mr KL Tang with all TV tagging number along with the laptop’s tagging number.
  • Mr KL Tang also asked me to take the photo of each TV, laptop and the PCs in FAVI.
Updated on 03 September 2020, 10:35 AM; 203 page visits from 3 September 2020 to 18 October 2025