All the technicians having a daily briefing or sharing of any problems that occur during handling working progress yesterday with the team leader for 15-20 minutes before they start the work.
Figure 7: Toyota Technicians Figure 8: Team Leader Technicians
Pour the engine flush gasoline/diesel (based on the type of vehicles) inside the engine oil tank (if given). Then the vehicle needs to be run for 5-10 minutes. Pour injector cleaner (for petroleum/diesel engine).
Figure 9: Engine Flush Figure 10: Pouring Injector Cleaner
The car battery is analyzed by using the DHC battery tester or Midronics to know whether in a good condition or need to be replaced.
Figure 11: Analyse Car battery
Change engine oil and oil filter with guidance from En. Anas. The bolt with the gasket needs to be tightened but not too tight to avoid the damage on the bolt track.
Figure 12: Draining the Engine oil
All engine parts need to be cleaned with water spray after done the service then dry it with an air blower gun.
Figure 13 : Clean car engine