MIMI MAISARA BINTI MOHAMED MUHIZAM's Reflection | MIMI MAISARA BINTI MOHAMED MUHIZAM's Profile

Week 7 – Week 12 (22^nd July – 30^th August)

Base: Wisma Amanah Raya Berhad, Kuala Lumpur.

Working Hours: 8:00am – 5:00pm (Monday – Friday); 8:00am – 1:00pm (Saturday)

Job Scope: Handling of Site as Site Coordinator (Mechanical & Electrical Trade)

Proposed Fit Out for Amanah Raya Berhad at Wisma Amanah Raya, No. 2, Jalan Ampang, 50508, Kuala Lumpur (Phase 2: Level 14, 12 & 10)

Mechanical Trade

1. Air Conditioning & Mechanical Ventilation

• To refurbish, deliver and install available existing Air-Cooled Split Unit complete with outdoor compressor, indoor fan coil units with fire retardant insulation, galvanized support brackets, spring isolators, secondary drain pan with fire retardant insulation, wired remote control & label marking.

• To supply, deliver and install all electrical work from the nearest distribution board (DB) complete with all concealed cabling and wiring, GI trunking and conduit, wired remote start/stop, power supply socket, all phase on/off switch with light indicator & all phase protection.

• To supply, deliver and install concealed refrigerant copper piping complete with closed cell fire retardant insulation, fittings, galvanized brackets/hangers, GI trunking.

2. Fire Protection System

• To dismantle and reinstall existing sprinkler heads in accordance with new ceiling layout complete with drop pipe, flexible sprinkler drops and mechanical fittings.

• To supply, deliver and install photoelectric smoke detectors complete with base, brackets, signal cabling in GI conduit up to Main Fire Alarm Panel.

• Supply, deliver and install fire extinguishers in accordance with the specifications and/or tender drawings complete with BOMBA certificate.

Type: 2.0 kg Carbon Dioxide

1. Cold Water & Sanitary Plumbing

• To supply, deliver and install all branch pipes (concealed) from the nearest existing main dropper pipe to all final sanitary fittings complete with GI hangers/supports, brass valves, stop cocks and label marking.

• To supply, deliver and install above ground uPVC soil and waste pipes and fittings to BS 4514/MS 1063 with traps, rubber rings/solvent cement joints including sockets, short lengths and set-in anchors.

Week 1 – Week 6 (10^th June – 21 July)

Base: Kamal Engineering Sdn Bhd, Gombak (HQ)

Working Hours: 9:00am – 6:00pm (Monday – Friday)

Job Scope: Handling of Tender Documents (Mechanical & Electrical Trade)

Tendering Process

1. Notice of pre-qualifications of tender in newspapers or websites
2. Invitation/Open to tender by Clients & Consultants
3. Provision of brief and initial answering of questions by Contractors
4. Initial meeting and compulsory site visit/walk
5. Procurement of tender documents (Vol I and Vol II)
6. Send out request for quotations to subcontractors
7. Fill in tender documents (hardcopy)
8. Submit tender before closing date
9. Bidding of tender by Contractors
10. Evaluation process by Clients & Consultants
11. Selections of Contractors
12. Contract award by Clients & Consultants

Tender Documents

1. Construction Drawing
2. Bill of Quantities
3. Schedule of Unit Rate
4. Schedule of Technical Data
5. Material Specifications

1. Employer Contact Details

Address: 2 – 65, Jalan Prima SG 3/1, Prima Seri Gombak, 68100 Batu Caves, Selangor.

Phone: 03-6186 2406

Email: inquiry.kesb@gmail.com

2. Period of Employment

Begin: 10^th June 2019

End: 30^th August 2019

3. Company Profile

Kamal Engineering Sdn. Bhd. started business as a Construction and Engineering company incorporated on the 1^st of December 1999. The company grows at a steady pace, started with small awarded contracts and now spearheading for medium and large-scale contract. In line with core business, the company also participates in consultancy services for Project Management especially in construction and engineering related field, and also engage in Maintenance Management as well.

The company’s corporate philosophy is to optimize its resources to carry out the construction job awarded, conduct project viability studies, investment appraisal, and handle project implementation, management & construction with innovative, creative and professional work ethics.

Kamal Engineering Sdn. Bhd. plays a significant role in bringing in new construction technology in Project Management and construction methodology to create an equal advantage for its clients, public and the company itself.

Kamal Engineering Sdn Bhd is an enterprise in Malaysia, with the main office in Batu Caves. It operates in the Heavy and Civil Engineering Construction industry. From the latest financial highlights, Kamal Engineering Sdn. Bhd. reported a net sales revenue increase of 13.27% in 2016. Its total assets recorded a growth of 13.5%. 

The main objective of this internship is to learn by working in a practical environment and to apply the knowledge acquired during the studies in the real world scenario in order to tackle the problems using the knowledge and skill learned during the academic process. The internship is an integral platform for anyone to gain experience in an actual workplace. Internship is a good opportunity for students to learn, to gain experience and also able to make experience. Human learn through experience and real life is full of different kinds of experiences. We will encounter many difficulties and obstacles, and with experiences we are expected to be able to encourage and complete the process.

                Experience in my eyes is a very valuable thing in life because we need to undergo through it. By doing my internship, it helps me to know and discover myself from different angles. It also helps me to control and develop my attitude and behavior in dealing with different kinds of people and situation. The aim of internship training is to strengthen student’s skills and make sure students apply the knowledge gain from their studies. This internship training will make students exposed directly to the real working environment.

                In the faculty of Malaysia-Japan International Institute of Technology, every student should go through the 12 weeks of internship period in any industry related to their specified subject in order to practically imply theoretical knowledge in the real work place. The internship program is conducted for the partial fulfillment of academic requirements in the sixth semester. It provides practical exposure and helps the student to understand corporate social responsibility and develop corporate attitude. This is a great opportunity for internee to know about the engineering industry that has worked as a building block for career development in the technical service sector.

                Through this internship training, students are able to widely understood all functional areas of management of an institution, identify, explore and strive to seize the opportunities and boldly realize opportunities in the fields of industry globally. Furthermore, students can make critical decisions, reactive and dare to explore solutions and best communication effectively in carrying the main language of engineering.

                The purpose of internship training is to expose students to real work of environment experience and at the same time, to gain the knowledge through hands on observation and job execution and from the internship training, the students will also develop skills in work ethics, communication, management and others. Moreover, this practical training program allows students to relate theoretical knowledge with its application in the manufacturing industry.

                The objective of internship training is to expose the student into the real working environment before graduating, to give the opportunities to the student to link the theories learnt with the practical aspects by placing them in the industries relevant to their respective field of studies in the university.