Helped in shifting items from main office to the store.
Helped in arranging items and furniture in new office.
Held farewell party for all interns in Sapura Aero.
Left workplace at 5.30 pm.
Wednesday, 29 August 2018
Arrived at 8.25 am.
Performed pre-flight inspection for Phenom 100.
Monitored departure of Phenom 100.
Left workplace at 5.30 pm.
Tuesday, 28 August 2018
Arrived at 8.25 am.
Performed cabin cleaning for Phenom 100.
Left workplace at 5.30 pm.
Monday, 27 August 2018
Arrived at 8.25 am.
Helped in cleaning stores and shifting items to new stores.
Left workplace at 5.30 pm.
Friday, 24 August 2018
Arrived at 8.25 am.
Checked price list for every item in storage room.
Left workplace at 5.30 pm.
Thursday, 23 August 2018
Arrived at 8.25 am.
Assisted in preparing stencils prints of "NO STEP" and "CUT HERE IN EMERGENCY" for aircraft HS-HAN.
Monitored maintenance for flap actuator of Phenom 100.
Left workplace at 5.30 pm.
Wednesday, 22 August 2018
Holiday (Eid ad-Adha).
Tuesday, 21 August 2018
Arrived at 8.25 am.
Performed paint touch up on aircraft N887LS.
monitored maintenance work due to flap actuator failure of Phenom 100.
Left workplace at 5.30 pm.
Monday, 20 August 2018
Arrived at 8.25 am.
Cleaned stain on carpet and floor of aircraft HB-JKI.
Left workplace at 5.30 pm.
Friday, 17 August 2018
Leave (absence) due to family matter approved by company.
Thursday, 16 August 2018
Leave (absence) due to family matter approved by company.
Wednesday, 15 August 2018
Arrived at 8.25 am.
Checked price list for every item in storage room.
Left workplace at 5.30 pm.
Tuesday, 14 August 2018
Arrived at 8.25 am.
Performed paint touch up on wing and stabilizer of aircraft B-KTL.
Went to ExecuJet office to meet Mr. Marc with other staff.
Left workplace at 5.30 pm.
Monday, 13 August 2018
Arrived at 8.25 am.
Performed paint touch up on wing engine of aircraft B-KTL.
Left workplace at 5.50 pm.
Friday, 10 August 2018
Arrived at 8.25 am.
Learnt structure of MD600N and its respective function.
Left workplace at 5.30 pm.
Thursday, 9 August 2018
Arrived at 8.25 am.
Performed compressor washing for Phenom 100 and Phenom 300.
Performed Engine Running Test for DA62.
Left workplace at 5.30 pm.
Wednesday, 8 August 2018
Arrived at 8.25 am.
Assisted in polishing and installing radome boot.
Left workplace at 5.30 pm.
Tuesday, 7 August 2018
Arrived at 8.25 am.
Performed radome composite repair job.
Learnt to use/inject resin (Epon 828) into the radome boot.
Left workplace at 5.30 pm.
Monday, 6 August 2018
Arrived at 8.25 am.
Reported in EGV Aero.
Performed painting (touch up) for galley carts.
Washed carts.
Learnt to install pop rivet on galley carts.
Left workplace at 5.30 pm.
Friday, 3 August 2018
Arrived at 8.25 am.
Assisted in packing and loading stuff in CAMO office.
Left workplace at 5.30 pm.
Thursday, 2 August 2018
Arrived at 8.30 am.
Assisted in packing and loading stuff in CAMO office.
Left workplace at 5.30 pm.
Wednesday, 1 August 2018
Arrived at 8.25 am.
Performed cabin cleaning for Phenom 300.
Checked tire pressure for Phenom 100.
Assisted in packing and loading stuff in CAMO office.
Left workplace at 5.30 pm.
Tuesday, 31 July 2018
Arrived at 8.25 am.
Monitored wheel replacement for Phenom 100.
Learnt to use locking wire on bolts for aircraft Phenom 100.
Left workplace at 5.30 pm.
Monday, 30 July 2018
Arrived at 8.25 am.
Performed cabin cleaning for Phenom 300.
Assisted in pre-flight inspection for Phenom 100.
Assisted in removing fuel from fuel drain.
Left workplace at 5.30 pm.
Friday, 27 July 2018
Arrived at 8.25 am.
Assisted in inspecting flaps of Phenom 100.
Removed cowling of DA 62.
Left workplace at 5.30 pm.
Thursday, 26 July 2018
Arrived at 8.25 am.
Did pre-flight inspection for N188MR.
Assisted in departure of aircraft N188MR.
Left workplace at 5.30 pm.
Wednesday, 25 July 2018
Arrived at 8.25 am.
Did pre-flight inspection for N9688R.
Assisted in rinsing and wiping N9688R.
Learnt aircraft departure procedure.
Monitored departure of aircraft N9688R.
Left workplace at 5.30 pm.
Tuesday, 24 July 2018
Arrived at 8.20 am.
Did compressor washing for N188MR (Phenom 100) and N9688R (Phenom 300).
Left workplace at 5.30 pm.
Monday, 23 July 2018
Arrived at 8.25 am.
Labeled items or components of aircraft N259SS (DA 62) according to their part numbers.
Left workplace at 5.30 pm.
Friday, 20 July 2018
Arrived at 8.20 am.
Learnt to identify or check aircraft component via Aircraft Illustrated Parts Catalog (AIPC).
Learnt safety precautions during aircraft refueling.
Received and assisted a visit from Dr Norazila Binti Othman from Faculty of Mechanical Engineering, UTM.
Left workplace at 5.30 pm.
Thursday, 19 July 2018
Arrived at 8.25 am.
Learnt safety precautions around helicopter.
Assisted in refueling helicopter N60683 (MD-600N).
Left workplace at 5.30 pm.
Wednesday, 18 July 2018
Arrived at 8.25 am.
Polished helicopter N60683 (MD-600N).
Monitored helicopter N60683 (MD-600N).
Left workplace at 5.30 pm.
Tuesday, 17 July 2018
Arrived at 8.25 am.
Learnt to marshal aircraft during departure of aircraft N200KP.
Assisted in cowling installation of aircraft N259SS.
Assisted in towing and marshalling of aircraft N259SS.
Left workplace at 5.40 pm.
Monday, 16 July 2018
Arrived at 8.15 am.
Reported to AeroManager - Engineering
Performed cabin cleaning for aircraft N188MR.
Performed cabin cleaning for aircraft N9688R.
Left workplace at 5.30 pm.
Friday, 13 July 2018
Arrived at 8.20 am.
Checked and updated technical publications for aircraft N188MR, N966JS and N9688R.
Learnt to use Flightradar 24 to track aircraft N200KP.
Left workplace at 5.30 pm.
Thursday, 12 July 2018
Arrived at 8.20 am.
Checked and updated technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for aircraft N9688R, N188MR and N966JS.
Attended meeting conducted by Mr Peter (General Manager) and fellow staffs.
Left workplace at 5.30 pm.
Wednesday, 11 July 2018
Arrived at 8.20 am.
Checked and updated technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for aircraft N9688R and N188MR.
Left workplace at 5.30 pm.
Tuesday, 10 July 2018
Leave (absence) due to family matters approved by company.
Monday, 9 July 2018
Leave (absence) due to family matters approved by company.
Friday, 6 July 2018
Arrived at 8.20 am.
Checked and updated technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for aircraft N9688R.
Checked and keyed in work order for aircraft N188MR into an online system (FBO 1).
Left workplace at 5.30 pm.
Thursday, 5 July 2018
Arrived at 8.20 am.
Checked technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for aircraft N188MR and N9688R.
Checked quotation for renovation work from three companies - Tulip Harmony Sdn Bhd, Hadi Venture Sdn Bhd and Meteor Niaga.
Left workplace at 5.30 pm.
Wednesday, 4 July 2018
Arrived at 8.20 am.
Checked technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for aircraft N188MR and N9688R.
Attended Health Screening Day at Hangar 3 @ AeroHandlers.
Learnt about Horizontal Situation Indicator (HSI) in Phenom 300 and Phenom 100.
Left workplace at 5.30 pm.
Tuesday, 3 July 2018
Arrived at 8.20 am.
Checked technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for aircraft N188MR and N9688R.
Did research on current flying schools in Malaysia.
Left workplace at 5.30 pm.
Monday, 2 July 2018
Arrived at 8.20 am.
Checked technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for aircraft N188MR and N9688R.
Left workplace at 5.30 pm
Friday, 29 June 2018
Arrived at 8.20 am.
Learnt to check technical publications for Service Bulletin, Service Letter, Airplane Flight Manual and others for Embraer.
Left workplace at 5.30 pm.
Thursday, 28 June 2018
Arrived at 8.20 am.
Learnt to fill in Issuance Record form.
Learnt aircraft registration number issued by NAA.
Learnt to use ICAO phonetic alphabet.
Left workplace at 5.30 pm.
Wednesday, 27 June 2018
Arrived at 8.15 am.
Checked N966JS Approved Estimate Report.
Checked and amended total cost report based on the N966JS Approved Estimate Report.
Left workplace at 5.30 pm.
Tuesday, 26 June 2018
Arrived at 8.15 am.
Printed and scanned documents.
Learnt to use paper shredder.
Assisted in packing stuffs in the office.
Learnt to key in aircraft technical log into a system.
Left workplace at 5.30 pm.
Monday, 25 June 2018
Arrived at 8.00 am
Reported in AeroManager Sendirian Berhad (AMSB)
Self-introduction to fellow staffs
Learnt filing system for documents
Learnt to key in data in a system
Left workplace at 5.30 pm
Friday, 22 June 2018
Arrived at 8.15 am
Monitored and assisted aircraft refueling
Assisted in towing aircrafts
Learnt to check the current amount of fuel of an aircraft
Left workplace at 5.30 pm
Thursday, 21 June 2018
Arrived at 8.15 am
Monitored and assisted aircraft refueling
Learnt to place chocks correctly against aircraft wheels
Assisted in towing aircrafts
Assisted in handling luggages and belongings into aircrafts before departure
Learnt aircraft departure procedure
Left workplace at 5.30 pm
Wednesday, 20 June 2018
Arrived at 8.15 am.
Monitored aircraft refueling
Learnt aircraft models
Learnt aircraft battery types
Assisted an engineer to operate maintenance by using onboard central maintenance computer (CMC) system
Learnt to use GPU
Left workplace at 5.30 pm.
Tuesday, 19 June 2018
Holiday (Eid al-FItr) approved by company.
Monday, 18 June 2018
Holiday (Eid al-FItr) approved by company.
Friday, 15 June 2018
Holiday (Eid al-FItr) approved by company.
Thursday, 14 June 2018
Holiday (Eid al-FItr) approved by company.
Wednesday, 13 June 2018
Sick leave due to menstrual cramps.
Tuesday, 12 June 2018
Arrived at 8.15 am.
Given a briefing by Ground Support Manager, Mr. Helmi.
Conducted FOD walk.
Received locker key.
Observed aircraft towing activities by staffs and trainees.
Observed engineers servicing aircraft.
Left workplace at 4.00 pm.
Monday, 11 June 2018
Arrived Sapura Aero at 8.15 am.
Supervisor gave a workplace tour and guide.
Supervisor introduced to the company and organizational chart.
Given a briefing on safety precautions.
Had quick review and explanation on aircraft parts and their functions.
Had a briefing on internship roster.
Received thumbprint access and safety vest
Observed aircraft towing activities by staffs and trainees.
Observed aircraft water tank servicing by staffs and trainees.
Left workplace at 4.30 pm.
Updated on 08 April 2020, 11:18 AM; 2245 page visits from 11 July 2018 to 9 November 2025
